Step 1. Turn off the ignition.

Step 2. Disconnect the Bluetooth connection from your phone or tablet.

Step 3. Disconnect the black wire from the negative of the coil, and connect it to the positive of the coil (where the red wire is also located).

Step 4. Now turn the ignition back on.

Step 5. A blue light should now be lit. It should stay on for at least 10 seconds. If not, start over from step 1.

Tip: The blue LED is not very bright; close your garage door and turn off the light to see it better.

Step 6. Turn off the ignition again and put the cable(s) back in their original position.

Step 7. The connection is now reset. You can reconnect with the password '1234'. Don't forget to change it in the app!